Kuryakyn X-Tension Highway Peg Mount Review

Kuryakyn X-Tension Highway Peg Mount Review

One of the first modifications I did to my V-Star 1100 Classic “Mistress” was to add some front pegs. At 6’2” I needed a way to stretch out my legs on longer rides. I had really wanted to get some Lindby Custom Linbars, still do, but funds were not available. So I started looking at front pegs to add to my bike to stretch out and rest my tired dogs on.

In researching for front pegs I decided I wanted some that could be folded up out of the way when not in use, rather than the stationary kind. Looking online I ran across the Kuryakyn X-Tension Highway Peg Mounts on the Kuryakyn website. I think I looked there because several other add-ons on my V-Star were from Kuryakyn. I honestly don’t remember where I ordered them from, but I ordered them online from an online store that had a good price. They arrived safely packed in foam peanuts several days after they were ordered.

The Kuryakyn X-Tension Highway Peg Mounts measure 4 ½” long and have a 1 ¼” offset which allows the reach adjustment to be fine tuned for the rider. The metal is really stout and fully chromed. Another feature I really liked was that the actual foot landing pad is thicker on these pegs, not being just a post. This gives the foot more purchase area. The pad is also equipped with floating rubber grip strips. These peg mounts allow for the peg to be folded up when not in use.

Installation is straight forward and required no special tools, just normal SAE sockets or wrenches most folks have in their garage. Here we go again with SAE nuts and bolts for a metric bike. I mounted them right onto the front frame down-tubes. They have to be mounted high enough up that they do not interfere with the operation of the rear brake pedal on the right side and the shifter on the left. Do not forget to use the included locking washers.

The hardest part about installation is getting them mounted evenly from side to side on height and angle. You also have to tighten the bolt at the pivoting point to the right tension so that they will stay up when put up. It probably took less than an hour to install them.

Having an extra place to put your feet on long ride is well worth it. With my backrest on the Corbin seat and my feet up I feel like I am riding a recliner down the freeway. You can use the pegs with the toe or heel of your shoe or boot. Alternatively, you can just rest the whole back of your foot up on top of the peg. This gives you multiple choices on long rides when you need to move around for comfort.

I have not had any issues with the Kuryakyn X-Tension Highway Peg Mounts. I will warn you Chromaholics that it is painstaking to clean the tops of the pegs between the rubber traction inserts. I have found the easiest way is to use the very edge of a soft cleaning towel. You have to go back and forth like you are shining shoes, between the rubber inserts. Torch gives the Kuryakyn X-Tension Highway Peg Mounts a M.M.M. rating of 9.5.

Ride on,
Torch

FMC Classic Side Lace Leather Motorcycle Jacket Review

FMC Classic Side Lace Leather Motorcycle Jacket Review

When the weather got too cold to ride in my OSi Cool Mesh Jacket for my commute to work, even with the liner installed, I started looking for a leather jacket. My quests lead me to Full Boar in Hurst Texas. Unfortunately, due to the economic times, they have since gone out of business. They had the FMC brand Classic Side Lace Leather Jackets on sale. I tried a couple on for size and decided to get one a little larger than I needed. Having a larger size would allow me to dress in layers if I ever needed to ride in extremely cold weather.

The FMC jacket is manufactured for First Manufacturing Company Inc and, according to the label, made in Pakistan. This FMC jacket has the classic motorcycle styling. The outer shell is made from Top Grain Cowhide and feels very substantial. The zippers are all stout and function well. There is an abundance of pockets including two hand pockets with zippers, a small pocket watch style pocket with snap on left side, an upper zippered pocket on left side chest, (great for gun concealment), and lastly a pocket on the inside left chest panel.

The FMC Leather Jacket half belt and side leather laces make it very adjustable. The Action Back makes it much more flexible when moving about and stretching. The sleeves are long to cover your wrists when your arms are stretched out holding handle bars. The sleeves also come with a four inch zippered cuff section to open up your wrists for more room or to let more air in.

When it is cold out you can zip in the Full Size Quilted Thinsulate Liner, unsnap the collar and fold it up, and zip the jacket all the way up. If you have something to cover your face, either full face helmet, neoprene face mask, or balaclava, the only other spot to worry about is your neck just under the Adam’s apple. If your balaclava goes down far enough it might work, otherwise you will need something else to cover that spot that the FMC Jacket does not.

The FMC Classic Side Lace Leather Motorcycle Jacket is constructed very ruggedly and is a very heavy jacket to wear. This jacket is thick, black and, in my opinion, too warm to use for rides in the Texan summer months. For Fall, Winter, and Spring commuting and rides the FMC jacket served well. The hardware is solid and I have had no issues with it through its first season of use. Torch gives the FMC Classic Side Lace Leather Motorcycle Jacket a M.M.M. rating of 9.5 out of 10.

Ride on,
Torch

Bates E02264 5" Defender Tactical Boot Review

Bates E02264 5" Defender Tactical Boot Review

Last fall I needed a pair of new shoes for work. I, of course, wanted a pair that would lend themselves to motorcycle riding as well. I had several requisites in mind, including non skid, oil resistant, slightly above ankle, and of course, Leather for protection. I started looking around at stores for something that would fit the bill, or rather, my foot.

One of my sons kept bragging about a pair of BATES boots that he had purchased on a recommendation from a local LEO, (Law Enforcement Officer). He bragged about how comfortable they were, how well they gripped the floor, and most of all, how light they were. They were lighter than the tennis shoes he used to wear out every other month because they just would not hold up. The Bates Boots were very durable. He purchased his at Academy Sports & Outdoors in Grapevine, Texas.

So one day I found myself at Academy and made it to the shoe section to see what they had and possibly try on some boots. I soon found out they had at least four different styles of Bates to choose from. They had some like my sons, 5” lace ups. They had some steel toe versions, some zip up versions and some composite toe versions. I tried on a few and soon decided I liked the versions that also had the side zipper because it made them soooo much easier to take on and off. I kind of liked the idea of having some extra toe protection so I opted for the 5” Composite Safety Toe Side Zip E02264 and made my purchase.

Here is the description from the Bates website:

The composite safety toes in these hard working boots won’t set off electronic security but definitely will add vital protection to your toes. Made with all non-metallic components, from zippers to speed lace eyelets. Featuring a breathable mesh lining, an ergonomically supportive insole and slip-resistant Ultra-Lites outsole to help prevent on-the-job injuries, these boots are value priced to not hurt your budget either. ASTM F2413-05 Rated.

Specs

Gender: Mens
Type: Boots
Height: 5"
Color: Black
Uppers: Unknown
Outsole: Enforcer Series Ultra-Lites™
Construction: Cement Construction
Toe: Composite Toe
Waterproof: No
Stealth: Yes
Weight: 3.0 lbs. per pair

I will attest to the fact that these boots are very comfortable. It did take a little time to get used to the Composite Safety Toes because of how they felt against my toes. I was not used to having a hard toed boot. These boots are very light weight. My son always told me how he had a hard time getting used to walking in such a light boot, he always wanted to high step. I had the same feeling from time to time. Both the Defenders together weigh about as much as one of my HD Pecos Boots.

The side zippered boots did cost a little more than the ones without, but the convenience is definitely worth it. You can lace the boots up how you like them and just used the zipper to take them on and off. Every few weeks the laces will work a little loose and have to be laced up tighter again. The zipper is probably my favorite feature.

These boots have great traction. I work in an Automotive Service Department and some of the floors are polished and when they are wet it can be extremely treacherous. The slip-resistance of the Bates Tactical boots Ultru-Lites outsole is extremely good. They use cement construction to attach the sole. The lugged sole is very rugged looking and may not work for formal dressing up.

The breathable mesh lining is another great feature. Bates Footwear constructed these boots with sweaty stinky feet like mine in mind. They do not completely stop my feet from sweating; after all I live in Texas. They do, however, keep my feet cooler, which prevents them from sweating as much. These boots breathe well and still do not stink. The trade off is that they are not waterproof.

The only metal on these boots is the zipper pull tab and slider. When zipped up there is a leather tab with hook and loop closure that covers it up so there is no metal showing that might scratch your bike. The tongue is padded and there is a large padded collar around the top which is real nice as well. Comfort is in much supply on these boots.

Soon after I started riding with the Bates boots I did notice one issue. The Composite Safety Toe makes the front of the boot taller than an ordinary boot or shoe. This made it where the boot would no longer fit under my front shifter to up-shift. Fortunately, my V-Star, "Mistress", is equipped with a heel-toe shifter, so I had to learn to start up-shifting with my heel. Now I have gotten so used to up-shifting with my heel I do it all the time no matter what shoes I am wearing.

So far the Bates Boots have held up real well and are proving themselves to be extremely durable. Not only that, they are real comfortable as well. Torch gives them a M.M.M. rating of 9 out of 10.

Ride on,
Torch

Friendship Blogger Award

Friendship Bloggers Award

A few days ago, the Baron himself, of Baron’s Life and Baron’s Photos, selected me as one of the eight bloggers to receive his Friendship Bloggers Award.

These blogs are exceedingly charming.
These kind bloggers aim to find and be friends.
They are not interested in self-aggrandizement.
Our hope is that when the ribbons of these prizes are cut, even more friendships are propagated.
Please give more attention to these writers.

Deliver this award to eight bloggers who must choose eight more and include this cleverly-written text into the body of their award.

Drum roll please, and without further ado, are the eight bloggers that I have chosen to bestow this award upon, not in any particular order:

Dan’s Low Rider in the Wind

Doug’s Tilted Horizons

Bam’s Bam Ridez

John’s friar’s ride

Mimi’s Mimi’s Motorcycle Journal

Becky’s Biker Chickz Blog

Smooth’s Easy Rider

Daniel Meyer’s C U Again